How To Hide Projector Wires? (Step By Step – 2 Minutes Guide)

Adding a projector to your home theater not only enhances the experience of gaming and watching movies but also adds a new level to the cost. On the other hand, your projector’s wires don’t look nearly as lovely to look at as the projected images on them, you admit.

It is more difficult to hide than the wires connecting to your television, especially if it is mounted on the ceiling. As a result, you may be stumped on how to effectively and affordably hide the projector’s connections. So how to hide projector wires? Let’s have a look.

5 Best ways to hide projector wires?

Fortunately, you won’t have to gaze at those awful wires for as long as you can think. Many creative solutions exist for tucking away your projector, regardless of the model or setup that you have it in. We’ll walk you through our top five suggestions in the following paragraphs!

The cord coverings may be used

So how to hide projector wires? It is possible to install a cable cover directly to the ceiling or wall of your house with a simple plastic or metal component. Your options include either acquiring a pre-made piece to fit your decor or having it painted to match the surrounding wall color.

A neater-looking appearance than a jumble of cords is possible even without dyeing it. It’s also possible to keep your cords organized by utilizing cord covers with labels attached. The pricing of a cord cover may be found here.

Removing all of the wires is necessary

The present is no need to hide the wires if they are not there. A dongle that connects by USB or HDMI may be purchased to make your projector wireless, and the cost of such a dongle usually is approximately $50.

It is possible to forgo using cables and send the signal directly to the projector by connecting your receiver, gaming system, or another content source. Even Bluetooth speakers may be used to stream music wirelessly.

The wire may be run along the walls inside

This is the most time-consuming and labor-intensive treatment, but it may also be the most effective. Do not attempt this step alone if you have no prior experience with electrical systems.

You can’t just cut a hole in the wall and send the cables down inside; doing so might cause a fire if the wires become too hot. About how to hide projector wires, it works fine.

Professional installation is the most expensive option since you’ll probably be forced to fork a few hundred bucks. However, if you’re looking for the cleanest possible appearance, this is the way to go if you want entirely hidden wires.

Please make the most of your furniture by using it wisely

Here is more information about how to hide your projector’s wires. Using a TV stand or entertainment center to store your television, cable box, and other equipment deemed peripherals is a convenient feature of a traditional flat-screen TV setup. You may do the same thing with your projector for no logical reason.

The wires may be routed behind or through a tall shelf or cabinet instead of the ceiling to prevent the projector from being mounted. This is a different method of installation.

Blu-rays may be stored on the shelf or used to display knickknacks, depending on the look you want to achieve in your home. Please make the most of your soundproofing materials by putting them to many uses.

Use soundproofing material

Sound is just as important as sight when creating an immersive experience in your home theatre. Sound-absorbing materials are typically used on the walls and ceilings of most rooms to redirect sound waves and achieve their maximum aesthetic potential. You may place them such that the projector’s cables go below them. Another choice you have.


This criterion does not necessitate using egg crates or any other ugly material. It’s a great idea to hang colorful tapestries, curtains, or rugs on the walls and ceilings of your TV room to reduce noise without making it seem like a recording studio.

Frequently Asked Questions

  1. What do you do with projector wires?

    The HDMI input on a projector is the most often utilized connector. With an HDMI connection, you may send digital video and audio from a laptop, Blu-ray player, or gaming computer to a projector. Compact beamers frequently include an HDMI input, which saves on space. You’ll need an HDMI cable to decode the more significant and minor signals.

  2. How do you run power to a ceiling-mounted projector?

    Check whether there is an electrical outlet in your attic, then connect your projector’s power line to the outlet and turn it on. The projector cable has to be connected to an outlet, turned on, and tested if you don’t have an attic. If you don’t, you can either buy a kit or have a new power line installed.

  3. How can I hide the wires in my ceiling?

    Wires in an open ceiling may be hidden by painting them or the ceiling beams. Additionally, you may use plastic or fabric cable covers, wooden molds, or stylish boxes to protect your cables. Verify that the wires you’ve installed are secure to avoid any disasters. Pinning them into place in all cases, save those involving fabric covers, is a simple and effective solution.

  4. Should I ceiling mount my projector?

    Instead of keeping it on a shelf at the back of the room, mounting your projector to the ceiling allows you to get it closer to the screen. With this, the gadget will provide the most brightness possible for you. Since ceiling mounts keep the projector out of the way, they’re a popular choice among clients.

Conclusion:

So how to hide projector wires? There are many options for hiding the cords that link your projector, and they are by no means the only ones available to you. If you’re creative, there are many ways to hide the projector wiring in your room’s design. However, since every space is unique, there isn’t a single solution that will work in every case.

The size of your viewing area and the arrangement of the room are critical considerations. Reflecting on your life and home before deciding on a plan is essential. “What’s the bottom line?” should be one of these inquiries. It is feasible to set up a home theatre with a projector without using those dreaded cords and connectors. We hope this article has helped you better understand which one is suitable for your area and your budget!

My name is Mark Smith. I am a electrical engineer and the founder and CEO of Projector Crunch. Having worked in the technological corporate sector for more than 10 years, I have extensive knowledge and expertise in different types of projectors and their accessories. You can read my full life journey here.

Leave a Comment