Can Short Throw Projectors be Ceiling Mounted? All Details That you Need!

You might have a question can short throw projectors be ceiling mounted? YES, that is the simple answer! If you have recently purchased your short throw projector, then you are probably wondering whether or not you should ceiling mount the projector or not. The answer to this question depends on several factors, such as the size of the room, the size of the screen, and others.

8 Reasons why short throw projectors should not be ceiling mounted

Here are 8 reasons why short-throw projectors should not be ceiling mounted. We hope these points can help you decide between installing the projector on the ceiling or a wall (or floor).

1. Wiring

One of the biggest reasons short-throw projectors should not be ceiling mounted in the wiring. It can be a huge pain to try and wire a projector when it is ceiling-mounted. If you ever need to move the projector, you must re-wire it.

2. Cost

The cost is the biggest reason why short-throw projectors should not be ceiling mounted. Not only do you have to buy the projector, but you also have to buy a mount and pay for installation. It can add up quickly, making it a very expensive option.

3. Difficulty Level

Might you be curious, can short throw projectors be ceiling mounted? While ceiling mounting a short throw projector may seem like a good idea, several reasons are not recommended. First, the projector’s angle will be off, which can cause image distortion.

Second, the heat from the projector can build up and damage the ceiling over time. Third, the weight of the projector can cause the ceiling to sag. Fourth, if the projector is not installed correctly, it could fall and injure someone.

Fifth, dust and other debris can accumulate on the projector, which can cause it to overheat. Sixth, insects can get into the projector and damage it. Finally, if there is a power outage, the projector will be unusable until power is restored.

4. Environmental Impact

One of the main reasons why short-throw projectors should not be ceiling mounted is the negative environmental impact. When a projector is mounted on the ceiling, it projects light and heat upwards, which can contribute to climate change.

Additionally, ceiling-mounted projectors use more energy than those that are floor-mounted. They require extra energy to operate the motor that moves the projector head up and down. The increased energy usage means more greenhouse gases are emitted into the atmosphere, furthering the damage to our planet.

5. Sound Quality / Volume

Regarding projectors, sound quality and volume are two significant factors to consider. If you are looking for a projector in a large room or auditorium, a short-throw projector will not be your best option. Short throw projectors are best for small rooms.

The sound quality of short-throw projectors is not as good as that of other projectors, and the volume is also not as loud. It can be a significant problem if you are trying to give a presentation to a large group of people.

6. Viewing Distance

The viewing distance is why you wouldn’t want to ceil mount a short-throw projector. A short-throw projector has a minimal range, so if your ceiling mounts it, viewers must be very close to the screen to see the image correctly.

7. Setup Time

Setting up a short-throw projector can be time-consuming, especially if you’re ceiling-mounting it. First, you’ll need to find the right location for the projector. Then, you’ll need to ensure the surface is level and secure.

Next, you’ll need to install the projector mount. Finally, you’ll need to connect all the cables and test the setup. It can take several hours, and it can be very frustrating if something goes wrong. it can be very frustrating.

8. Safety Issues

Safety is one of the main reasons why short-throw projectors should not be ceiling mounted. If the projector falls, it could seriously injure someone. Additionally, if the projector is not adequately secured, it could fall and damage the equipment.


Can any projector be ceiling mounted?

No, not every projector can be ceiling mounted. There are a few reasons why short-throw projectors shouldn’t be ceiling mounted. Here are seven of them:
1. Short-throw projectors have a minimal range.
2. They are not designed for use in high-humidity environments.
3. The image quality is often poor when they are used at an angle.
4. They can be challenging to install and align properly.
5. They can produce a lot of noise when in use.
6. They can generate a lot of heat, which can be a problem in small spaces.
7. They can be expensive to repair or replace if they are damaged.

Where should I put my short throw projector?

Many assume the best place to put a short-throw projector is on the ceiling. First, short-throw projectors are designed to be placed close to the screen or wall, so mounting them on the ceiling will put them too far away from the surface it is projecting onto.
Second, a ceiling mount can block the projector’s ventilation, causing it to overheat and potentially damage the projector.

How far can you mount a short-throw projector?

Depending on the model, short-throw projectors can be mounted anywhere from six to twenty-four inches from the wall or screen. However, it is generally not recommended to ceiling mount a short-throw projector.

How do you mount a projector screen to a ceiling?

Many people think that mounting a projector screen to the ceiling is the best way to go, but there are several reasons why this is not recommended.
First, getting the screen level cannot be easy if you have little experience with ceiling mounts. Secondly, if you have a short-throw projector, the ceiling mount will likely block some of the light, reducing image quality.


When you’re looking to buy a projector, you’ll likely come across the question can short throw projectors be ceiling mounted, which means that the projector can be mounted close to the display, which in turn means that you don’t need to have as much space between your projector and your display as with other types of projectors.

My name is Mark Smith. I am a electrical engineer and the founder and CEO of Projector Crunch. Having worked in the technological corporate sector for more than 10 years, I have extensive knowledge and expertise in different types of projectors and their accessories. You can read my full life journey here.

Leave a Comment